Duct Hose／TIFLEX Hose Stretchable Air Hose Tiflex Hose P-2 Type
Features
- ・Excels in stretchability (rate of shrinkage 1/3 ~ 1/4).
- Freely stretchable and excels in accommodation property making storage convenient.
- Also, less space is needed for stocking.
- ・Hose transportation cost is less making it economical.
- ・50% lighter in weight than existing duct hoses.
- (Compared with Tigers Polymer's other duct hoses.)
- ・Light weight and freely bendable making piping work easy.
- ・Hose can be bent toward any direction for which reason elbow cuffs are not necessary.
Applications
- ・For spot cooling and heating.
- ・For air-conditioning.
- ・For indoor air conveying and exhaust.
- ・For exhaust of paint and gas venting.
- ・For gas conveying (include hot air).
- ・Can be shaped into various forms making it usable for interior designing as well.
| Fluid | ・ Air(excluding compressed air) |
|---|---|
| Temperature | Temperature -20℃～ Temperature 80℃ |
| Function | ・ Air intake and exhaust |
*Since wire might be exposed from a hose end, hose should be handled carefully.
Sizes and properties(P2-□ )
| Nominal Dia. (Φ) |
I.D. (mm) |
O.D. (mm) |
Pitch (mm) |
Working Pressure (20°C) MPa or less/ [kgf/cm² or less] |
Allowable Reduced Pressure (20°C) KPa or less/ [mmHg or less] |
Bending Radius (mm or more) |
Ref. Weight (g/m) |
Std. Length (m) |
|---|---|---|---|---|---|---|---|---|
| 38 | 37.5 | 41.5±0.8 | 9.5 | 0.018[0.18] | -17.0[-130] | 30 | 140 | 5 |
| 50 | 53.5 | 57.5±1.0 | 11.0 | 0.014[0.14] | -17.0[-130] | 40 | 175 | |
| 65 | 67.0 | 71.0±1.0 | 11.5 | 0.011[0.09] | -17.0[-130] | 50 | 210 | |
| 75 | 76.5 | 80.5±1.0 | 12.0 | 0.009[0.09] | -17.0[-130] | 60 | 245 | |
| 90 | 92.0 | 96.0±1.0 | 14.0 | 0.007[0.07] | -17.0[-130] | 70 | 320 | |
| 100 | 102.0 | 106.0±1.0 | 14.0 | 0.007[0.07] | -17.0[-130] | 75 | 365 | |
| 125 | 127.5 | 131.5±1.0 | 15.0 | 0.005[0.05] | -11.0[-85] | 90 | 435 | |
| 150 | 155.0 | 159.0±1.0 | 15.0 | 0.004[0.04] | -8.0[-62] | 110 | 530 | |
| 200 | 202.0 | 208.0±1.0 | 19.3 | 0.003[0.03] | -6.0[-45] | 140 | 1,085 | |
| 250 | 253.5 | 259.5±1.0 | 21.5 | 0.002[0.02] | -4.5[-35] | 180 | 1,250 | |
| 300 | 302.0 | 308.0±1.5 | 24.0 | 0.002[0.02] | -4.0[-30] | 230 | 1,455 |
(Note) I.D. shall be measured as the distance between the helical reinforcement wires.
Bending Test
| Nominal Dia. (Φ) |
Bending Strength (Bent 180°C, 25°C,20 times/min) |
Stretching Strength (25°C,20times/min) |
Tensile Strength (25°C) N{kgf} |
|---|---|---|---|
| 50 | 100,000 times no change | 100,000 times no change | 392{40.0} |
| 65 | 100,000 times no change | 100,000 times no change | 490{50.0} |
| 75 | 100,000 times no change | 100,000 times no change | 588{60.0} |
- [Usable temperature range]-20°C∼80°C
- However, please consult us because there are case of the stretching performance being affected when used continuously at over 60°C.
●These descriptions can be altered for a reason of improvement without any notification.
●These descriptions shall be as of September 1, 2019.
Inquiry for Details of Our Products
Product specifications, dimensions, and designs are subject to change without notice due to improvements, etc.