Function, rubber sheet according to a use Non-Contaminating Rubber Sheet
Features
- ・Please confirm before use of these rubbers although they do not contaminate metal and plastic much.
Applications
- ・Seal material for plastic molding.
| Function | ・ Non-Contaminating Property |
|---|
*Hardness measurement is revised to “After 3 seconds” according to JIS K 6253 (2006). However, generally, the conventional "measurement within 1 second" is to be the mainstream for nominal hardness, so this result is measured value and the measurement result after 3 seconds is shown in ().
Properties: Non-Contaminating Rubber Sheet
| Item Name | Properties | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| General Properties | Heat-Resistant Aging 100 °C×72h |
Compression Set 70 °C × 24h % |
Material | ||||||
| Hardness Type A |
Tensile Strength at Break MPa {kgf/cm2} |
Elongation at Break % |
Hardness Change Type A |
Change Rate of Tensile Strength at Break % |
Change Rate of Elongation at Break % |
||||
| EPT-S | <40> | 40(39) | 10.3 {105} |
660 | + 1 | - 3 | - 2 | 19 | EPT |
| <50> | 52(48) | 11.9 {121} |
680 | + 3 | + 5 | - 8 | 15 | EPT | |
| <60> | 60(56) | 11.7 {119} |
670 | + 3 | + 7 | - 3 | 17 | EPT | |
| <70> | 70(68) | 11.5 {117} |
480 | + 5 | + 1 | - 3 | 9 | EPT | |
| <80> | 83(80) | 13.4 {137} |
250 | + 2 | + 3 | + 4 | 10 | EPT | |
| <90> | 93(91) | 14.6 {149} |
220 | + 1 | + 4 | 0 | 12 | EPT | |
| TCB 607 0P | 60(57) | 8.3 {85} |
490 | +17 | -20 | -27 | 21 | CR | |
JIS K 6250
Please check here to find out the environmental compliance of this product.
●These descriptions can be altered for a reason of improvement without any notification.
●These descriptions shall be as of November 1, 2021.
Inquiry for Details of Our Products
Product specifications, dimensions, and designs are subject to change without notice due to improvements, etc.