function, rubber sheet according to a use

Environmental Load Reducing Sheet

New and eco-friendly rubber sheets without use of designated chemical substances which are recently viewed with suspicion. These sheets also have weather resistance as well as oil resistance.

【 Features 】

•Eco-friendly synthetic rubber sheets which have weather resistance as well as oil resistance.
•Phthalate compounds and etc. such as DOP are not used.
•Halogen-containing materials such as chloroprene or PVC are not used.
•Complies with Japanese food hygiene law "Japanese Ministry of Health and Welfare Notification No.85" including extraction of acetic acid.
•The related chemical substances designated by Law for PRTR are not used.
•The 6 chemical substances which are banned to use by RoHS were not detected as the result of analysis.

(Note) Law for PRTR = Laws concerning comprehension and promotion of improvement in control of release amounts of specific chemical substances in the environment.
RoHS Directive = Restriction of the use of certain hazardous substances in electrical and electronic equipment.

【 Properties: Ti-Eco Sheet 】

Test Item Unit Test results Test Condition
Ti-Eco Sheet Ti-Eco Sheet White Ti-Eco Sheet Green
Specific Gravity 1.31 1.38 1.36
Hardness Durometer
Type A
71(67) 62(58) 63(59)
Tensile Strength at Break MPa{kgf/cm2} 9.4{95.9} 7.9{80.6} 7.8{79.6}
Elongation at Break 600 810 820
Tear Resistance kM/m{kgf/cm} 42.4{43.3} 25.0{25.5} 27.7{28.3}
Compression
Set(1)
31 38 39 70℃×24h
100℃×72h
Compression
Set(2)
42 48 54
Heat Aging
Resistance(1)
Hardness Change Point +7 +4 +5 100℃×72h
Change Rate of
Tensile Strength
at Break
+11 +4 +8
Change Rate of
Elongation at Break
-23 -16 -12
Heat Aging
Resistance(2)
Hardness Change Point +9 +8 +6 100℃×100h
Change Rate of
Tensile Strength
at Break
+15 +7 +8
Change Rate of
Elongation at Break
-27 -15 -14
Oil Resistance
(1)
Volume Change Rate v% +40 +25 +29 ASTM#1
100℃×72h
Weight Change Rate w% +26 +16 +18
Hardness Change Point -24 -15 -18
Change Rate of
Tensile Strength
at Break
-35 -41 -50
Change Rate of
Elongation at Break
-33 -3 +2
Oil Resistance
(2)
Volume Change Rate v% +98 +102 +102 IRM903
100℃×72h
Weight Change Rate w% +67 +67 +68
Hardness Change Point -42 -44 -42
Change Rate of
Tensile Strength
at Break
-64 -65 -67
Change Rate of
Elongation at Break
-51 -15 -26
Ozone Resistance No crack No crack No crack 40℃×500ppb(50pphm)×
20%Elongated×120h

JIS K 6250

●These descriptions can be altered for a reason of improvement without any notification.
●These descriptions shall be as of January 1, 2017.

function
  • ・Weather Resistance
  • ・Oil Resistance

Inquiry for Details of Our Products

Product specifications, size and design are subject to change without notice for improvement.

back to the page

Page Top